Please choose your delivery location

The selection of the country/region page can influence various factors such as price, shipping options and product availability.
My contact person
e-chains®, chainflex®, cables, harnessed systems readychain®

+372 667 5600
dry-tech® bearing technology

+372 667 5600

Linear Actuators, Motors & Controllers

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date. For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Number of products: 103

New

drylin® E lead screw stepper motor, stranded wires with JST connector and encoder, NEMA17

  • Installation size: NEMA17/flange dimension 42mm
  • Protection class: IP40
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Motor connections: stranded wires with JST connector, encoder with JST connector
97.47 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® E lead screw stepper motor, stranded wires with JST connector and encoder, NEMA23

  • Installation size: NEMA23/flange dimension 56mm
  • Protection class: IP40
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connections: stranded wires with JST connector, encoder with JST connector
120.02 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® E lead screw stepper motor, stranded wires with JST connector and encoder, NEMA24

  • Installation size: NEMA24/flange dimension 60mm
  • Protection class: IP40
  • Holding torque: 3.50Nm
  • Nominal current: 4.20A
  • Motor connections: stranded wires with JST connector, encoder with JST connector
123.72 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® E stepper motor, stranded wires with Molex connector and encoder, NEMA34

  • Installation size: NEMA 34/flange dimension 86mm
  • Protection class: IP40
  • Holding torque: 5.90Nm
  • Nominal current: 6.40A
  • Motor connections: stranded wires with Molex connector, encoder with JST connector
191.02 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® E EC/BLDC motor with stranded wires, Hall, encoder and brake, NEMA23

  • Installation size: NEMA23/flange dimension 56mm
  • Protection class: IP40
  • Rated torque: 0.60Nm
  • Nominal voltage: 48V DC
  • Motor connections: stranded wires, encoder with stranded wire, brake with stranded wire
  • Brake voltage: 24V
  • Integrated brake for vertical loads
267.96 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® E EC/BLDC motor with stranded wires, Hall, encoder and brake, NEMA24

  • Installation size: NEMA24/flange dimension 60mm
  • Protection class: IP40
  • Rated torque: 0.80Nm
  • Nominal voltage: 48V DC
  • Motor connections: stranded wires, encoder with stranded wire, brake with stranded wire
  • Brake voltage: 24V
  • Integrated brake for vertical loads
290.51 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® E EC/BLDC motor with stranded wires, Hall, encoder and brake, NEMA34

  • Installation size: NEMA34/flange dimension 86mm
  • Protection class: IP40
  • Rated torque: 1.00Nm
  • Nominal voltage: 48V DC
  • Motor connections: stranded wires, encoder with stranded wire, brake with stranded wire
  • Brake voltage: 24V
  • Integrated brake for vertical loads
323.13 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® D7 stepper motor output stage (NEMA11/17) with cycle/direction

  • Can control stepper motors with up to 2.7A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
70.93 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® E EC/BLDC motor with stranded wires, Hall, encoder and brake, NEMA17

  • Installation size: NEMA17/flange dimension 42mm
  • Protection class: IP40
  • Rated torque: 0.30Nm
  • Nominal voltage: 48V DC
  • Motor connections: stranded wires, encoder with stranded wire, brake with stranded wire
  • Brake voltage: 24V
  • Integrated brake for vertical loads
245.45 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® D8 stepper motor output stage (NEMA23/24) with cycle/direction

  • Can control stepper motors with up to 4 A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
87.04 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® D9 stepper motor output stage (NEMA34) with cycle/direction

  • Can control stepper motors with up to 7A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
95.39 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page

drylin® D1 motor control system for stepper, DC and EC/BLDC motors

  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone motor
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff

    All relevant documents can be found below in the downloads.


    TEST BEFORE INVEST - Try out the motor control system with the online simulation here
378.84 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page
New

drylin® D2 motor control system for stepper, DC and EC/BLDC motors

  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
     
    You can find all relevant documents in the downloads below.
     

    Further information on dryve D1 info page
363.62 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page

drylin® D3 for direct current motors

  • Simple automation directly using the control system without software and/or PC
  • Operation with limit switch or via power consumption
  • Left/right operation and speed control directly on the housing
  • Option for external switches/joysticks
  • Various modes of operation, such as tip operation and start to finish (semi-automatic)
  • Various adjustable acceleration ramps
  • Power supply via 24V/2.5A
     
    All relevant documents for dryve D3 can be found in the downloads.
134.40 EUR/Pc.
1 ready for shipping from igus Germany in 24 - 48 hours
To the product page

drylin® D3-LM motor control system for DC motors with loop mode

  • Same dimensions as the standard D3
  • Extended functions for "Micro Automation"
  • Individually pre-programmed pendulum movements
  • Individually pre-programmed pause times between movements
     
    All relevant documents for D3 dryve:
    Go to download portal
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.