iglidur® F, flange bearing, mm - FFM

iglidur® F | Electrically conductive, highly pressure-resistant
Highest stiffness and hardness, in addition particularly conductive: when it comes to the electrical conductivity of plain bearings, i.e. especially in applications where electrostatic charging must not occur, iglidur® F is the right choice. Moreover, the iglidur® F plain bearings are extremely pressure-resistant. At room temperature, they could be statically loaded up to 105MPa.

Typical application areas

Automotive
Textile industry

Here you will find further possible applications:
Industry solutions

 

When to use it? When the bearing should be electrically conductive For high static loads

When not to use it? If mechanical rework of the wall surface is required iglidur® M250, flanged bearing, mm When maximum wear resistance is required iglidur® W300, flanged bearing, mm When very low friction values are required for dry operation iglidur® J, flanged bearing, mm For use under water iglidur® H370, flanged bearing, mm When an universal bearing is required iglidur® G, flanged bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining