1. No pin and bore connection2. Small pitch for quiet, smooth running3. Very large gliding surfaces4. Internal stop-dog5. KMA mounting brackets with option to fasten from any side (strain relief
is possible through separate tiewrap clamps)6. Can be lengthened and shortened required, thanks to modular design7. Optionally with or without integrated C-profile
8. Small pitch for quiet and smooth running
* The required clearance height is HF = H + 80 mm (with 5,0 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly narrow space conditions.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed end
Pitch: 65 mm
Chain links per m: 16 links/1000 mm
Travel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
from 6 m to max. 60 mChain length= S/2+K2Long travels - gliding (up to max. 60 m) Here, the e-chain® upper runs gliding on the lower run in a guide trough. We recommend letting our engineers support you when planning this type of system. In case of travel lengths between 4.0 and 6 m, we recommend a larger unsupported e-chain®.
A1 = Moving endA2 = Fixed end A3 = Guide trough with glide bar A4 = Guide trough with glide bar A5 = Total length of the guide trough
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
42 widths and 6 bend radii
Modular internal separations
KMA - mounting brackets
Super quiet design
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Standard
E6.80.1 Standard - for all uses
Separator, wide base for maximum holding strength
E6.80.2 Faster installation of cables
Separator for igus® openable crossbar 450.X. Q. Wide on one side for high holding strength, narrow on opposite side for easy cable fitting.
E6.80.3 For many small cables
Separator with narrow base for many small cables
next to each other.
Saves space in the e-chain®. Also optionally available
for QuickLock crossbars.
E6.80.5 Locks in securely in preset increments
The locking separator for the opening crossbar can be positioned exactly. Recommended for side-mounted applications.
520.X Horizontal division
Locks in securely at both ends of the separator,
secure width fixing possible. Can be used as full-width shelf for
integrated subdivision or as partial shelf
KMA - pivoting
Support tray - Type 01
Data protection declaration