Attachment from any side
2. Quick assembly:
Crossbars removable along the inner and outer radius
3. Low noise:
Small pitch for
quiet, smooth running
High speed and/or
5. Long service life:
high tensile strength
6. Minimal abrasion:
No pin and
7. Modular design:
Can be lengthened and shortened
Inner width Bi: 30 to 140 mmBend radii R: 55 to 150 mm
* The required clearance height is HF = H + 40 mm (with 2 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly small space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endPitch: 22 mmChain links per m: 46 links/1012 mmTravel: SChain length = S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Reference example A:
Fill weight = 1 [kg/m]
Unsupported length FLB = 1 m
Travel = 2 m
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Standard
E6.29.1 Standard - for all uses
Separator, wide base for maximum holding strength
E6.29.2 Faster installation of cables
Secure seating on one side with wide base, other side
narrow for easy installation of cables.
2300.x Horizontal division
Locks securely into separators at both ends, giving a fixed width. Can be used as full-width shelf for
integrated subdivision or as a partial shelf for
separation on 3 levels.
KMA - pivoting
Support tray - Type 01
Data protection declaration